Ask about Sistema de filtro de agua Purewell con botella plegable de compresión de 1000 ml para trail running, senderismo de larga distancia, viajes, ciclismo y pesca, azul
- Sistema de filtración de cinco etapas: La botella de agua plegable Purewell con sistema de compresión cuenta con un sistema de filtración de cinco etapas, que incluye una membrana de ultrafiltración de fibra hueca, carbón activado de cáscara de coco, un cartucho de filtro de malla y dos capas de fibras de algodón PP de grado médico. Filtra hasta el 99.9999% de los contaminantes, olores, cloro residual, materia orgánica y otras sustancias microscópicas (Nota: Para asegurar que el equilibrio de minerales esenciales en el agua permanezca inalterado, el valor de TDS no se puede reducir).
- Precisión de filtración: La botella plegable Purewell con sistema de compresión elimina las impurezas del agua a través de un tamaño de poro de 0.01 micrones. En comparación con otros productos con una precisión de filtración de 0.1 micrones, mantiene un caudal óptimo (600 mililitros por minuto) al tiempo que conserva la precisión de filtración esperada de este equipo de senderismo.
- Larga vida útil: Este filtro de agua esencial para la supervivencia al aire libre proporciona 5,000 litros (1,320 galones) de agua potable limpia y segura. Con un peso inferior a 100 gramos, cabe fácilmente en un bolsillo, bolsa de gimnasio o kit de supervivencia.
- Versátil: La botella plegable Purewell con sistema de compresión es una pieza de equipo de supervivencia y emergencia. Es imprescindible para acampar, hacer senderismo, escalar rocas, cazar, hacer trekking, mochilear, andar en bicicleta, navegar, viajar en RV, viajes al extranjero y aventuras en la naturaleza.
- Materiales de alta calidad: Fabricado con materiales resistentes y duraderos y libre de bisfenol A (BPA), cuenta con múltiples modos de filtración para proporcionarle una fuente confiable de agua potable limpia en cualquier momento y lugar, especialmente en emergencias.
How to Set Up Your Countertop Gravity Water Filter System
Follow these simple steps to assemble the system, install the core filters, flush before first use, and prepare it for daily use.
Prepare and Clean the Parts
Before assembly, check the main parts and clean the system components.
-
1
Wash Your Hands Handle the system with clean hands before setup.
-
2
Check Included Parts Make sure the chambers, lid, spigot, stand, and core filters are ready.
-
3
Clean Before Assembly Rinse the chambers and accessories before first use.
Assemble the Lid Knob
Attach the lid knob to the lid and secure it with the included hardware.
-
1
Place the Lid Knob Insert the lid knob into the center hole of the lid.
-
2
Add Washer and Gasket Place the washer and gasket in the correct position.
-
3
Tighten the Screw Fasten the knob until it feels stable.
Install the Basic Spigot
Install the basic spigot into the lower chamber before stacking the system.
-
1
Insert the Spigot Place the spigot through the lower chamber hole with the gasket and washer.
-
2
Add the Inside Parts Place the remaining washer and gasket from the inside of the chamber.
-
3
Tighten the Hex Nut Use the wrench to secure the spigot vertically.
Install the Core Filters
Use the required number of core filters for your system model.
-
1
Insert the Core Filters Place the core filters through the holes in the upper chamber.
-
2
Secure the Filters Use the filter washer and wing nut to hold each core filter in place.
-
3
Check Stability Make sure each core filter is firmly installed before adding water.
Stack the Chambers and Stand
Set the system together in the correct order before flushing.
-
1
Attach the Anti-slip Mat Place the anti-slip mat on the bottom of the lower chamber.
-
2
Place the Lower Chamber on the Stand Set the lower chamber securely on the stand.
-
3
Add the Upper Chamber and Lid Place the upper chamber into the lower chamber, then cover it with the lid.
Flush Before First Use
Flush the system before drinking water from it for the first time.
-
1
Fill the Upper Chamber Add water and let it move through the core filters.
-
2
Discard the First Batch Pour out the first filtered water from the lower chamber.
-
3
Repeat 2–3 Times After flushing, the system is ready for regular use.
How the Filter System Works
Water is added to the upper chamber and moves through the center filter by gravity. After filtration, water collects in the lower chamber and is ready to dispense from the spigot.
Add water to the top chamber. The system works without electricity, plumbing, or pressure.
Water naturally flows downward through the center filter element, where the filtration process takes place.
After passing through the filter, water collects in the lower chamber for storage and daily use.
Open the spigot to pour filtered water for drinking, cooking, or everyday hydration.
Filter Replacement Guide
Replacing filters on time helps your filtration system keep working properly. It also helps maintain water flow, drinking water taste, and everyday use confidence.
Filter life may vary by water quality, usage frequency, and total water volume filtered.
Replace the filters when they reach the rated lifespan listed for your filter model.
If filtering takes much longer than usual, clean or replace the filters as needed.
If unwanted taste or smell becomes noticeable again, it may be time to replace the filters.
Rain, river, stream, or well water may shorten filter life compared with regular tap water.
Choose filters that match your filtration system, filter series, and setup.
Prime, rinse, or flush new filters according to the product instructions.
Make sure washers, seals, and threaded parts are installed correctly.
Empty and clean the upper and lower chambers before installing new filters.
If your system uses paired filters, replace matching filters together when needed.
Write down the replacement date and set a reminder based on your usage.
Use this checklist to choose the right replacement filter for your Purewell system and check whether it may also fit select compatible systems from other brands.
| Filter Category | Filter Type | Fits Purewell Systems | Other Compatible Systems |
|---|---|---|---|
| K Series Carbon Filters (Pro) | Core Filter | SS Series and K Series filtration systems. | Select ProOne Big+ / Big II and Berkey BB9-2 style systems. |
| K Series Carbon Filters | Core Filter | SS Series and K Series filtration systems. | Select ProOne Big+ / Big II and Berkey BB9-2 style systems. |
| K Series Carbon Filters (Classic) | Core Filter | SS Series and K Series filtration systems. | Black Berkey Elements style systems and select Berkey gravity systems. |
| K Series Ceramic Filters | Core Filter | SS Series and K Series filtration systems. | Most gravity-fed systems from major brands, including Berkey, ProOne, Alexapure, Waterdrop, Doulton, Boroux, Culligan, and more. |
| SS Series Square Carbon Filters | Core Filter | SS Series and K Series filtration systems. | Select ProOne Big+ / Big II and Berkey BB9-2 style systems. |
| SF Series Multi-Functional Filter | Core Filter | SF Series filtration systems. | Select Zero pitchers and dispensers. |
| BO Series Unique Compound Filter | Core Filter | BO Series filtration systems only. | Not intended for K Series, SS Series, or other gravity filtration systems. |
| K Series Specialty Add-On Filters | Supplemental Filter | Use together with K Series or SS Series core filters. | Select Travel, Big, Royal, Imperial, Light, and Crown Berkey models as an additional filter option. |
System Package
Main parts included for the countertop gravity water filter system.
- Upper Chamber× 1
- Lower Chamber× 1
- Lid× 1
- Anti-slip Mat× 1
- Stand× 1
- User Manual× 1
Basic Spigot Parts
Parts used to install the basic stainless steel spigot.
- Basic Spigot× 1
- Spigot Gasket× 2
- Beveled Washer× 2
- Spigot Hex Nut× 1
- Wrench× 1
- Screwdriver× 1
- Plastic Spigot× 1
- Silicone Plug× 1
Selected Filter Package
Your package includes the BO Series Carbon Filters selected with this system. The filter option may vary based on your product selection.
- Selected Filters SF Series Core Filter
- Package Quantity 1 Box / 1 Filter
- System Use Install One Filter Only
2.25 Gallon Water Filter System Installation Video
Watch this step-by-step guide to set up your Purewell 2.25 gallon water filter system and install the filter element in the correct position before first use.
2.25 Gallon System Setup & Filter Placement
This video shows how to assemble the Purewell 2.25 gallon water filter system, including how to place and install the filter element properly for daily filtration.
Certificado por la NSF para su salud
Probado de forma independiente para cumplir con las normas NSF/ANSI 42 y 372, el nivel más alto de confianza en filtración de agua.
Garantía de ausencia de plomo (NSF/ANSI 372)
Materiales certificados sin plomo para que disfrute de su agua sin preocupaciones.