Ask about Purewell persönlicher Wasserfiltrations-Strohhalm, Notfall-Survival-Ausrüstung, Wasserreiniger für Camping, Wandern, Klettern, Rucksackreisen（UK）
- Überlebensausrüstung: Ein tragbarer Wasserfilter, zertifiziert von SGS und NSF, ideal für Wandern, Camping, Reisen und Notfallvorsorge.
- Kompaktes Design: 5.03 Zoll lang und 1.18 Zoll im Durchmesser, leicht zu tragen
- Mehrere Zubehörteile: Dieser tragbare Wasserfilter wird mit einem Haken und einem Verlängerungsschlauch geliefert und ist somit perfekt für eine Vielzahl von Situationen.
- Leicht und tragbar: Wiegt nur 2 Unzen, passt problemlos in eine Tasche, Sporttasche, einen Rucksack oder eine Handtasche.
- Lange Lebensdauer: Liefert bis zu 633 Gallonen (1,200 Liter) sauberes Trinkwasser; von beiden Enden abnehmbar für einfache Reinigung.
- Langlebige Materialien: Hergestellt aus lebensmittelechtem, BPA-freiem ABS-Kunststoff für sicheres und hochwertiges Trinkwasser.
- Vielseitige Verwendung: Kompatibel mit weichen Wasserbeuteln und Einweg-Wasserflaschen; kann auch als Schwerkraftwasserfilter für Gruppengebrauch verwendet werden.
- Hohe Filtrationspräzision: Eine Porengröße von 0,1 Mikrometern entfernt 99,99 % der Partikel bei optimaler Durchflussrate.
How to Set Up Your Countertop Gravity Water Filter System
Follow these simple steps to assemble the system, install the core filters, flush before first use, and prepare it for daily use.
Prepare and Clean the Parts
Before assembly, check the main parts and clean the system components.
-
1
Wash Your Hands Handle the system with clean hands before setup.
-
2
Check Included Parts Make sure the chambers, lid, spigot, stand, and core filters are ready.
-
3
Clean Before Assembly Rinse the chambers and accessories before first use.
Assemble the Lid Knob
Attach the lid knob to the lid and secure it with the included hardware.
-
1
Place the Lid Knob Insert the lid knob into the center hole of the lid.
-
2
Add Washer and Gasket Place the washer and gasket in the correct position.
-
3
Tighten the Screw Fasten the knob until it feels stable.
Install the Basic Spigot
Install the basic spigot into the lower chamber before stacking the system.
-
1
Insert the Spigot Place the spigot through the lower chamber hole with the gasket and washer.
-
2
Add the Inside Parts Place the remaining washer and gasket from the inside of the chamber.
-
3
Tighten the Hex Nut Use the wrench to secure the spigot vertically.
Install the Core Filters
Use the required number of core filters for your system model.
-
1
Insert the Core Filters Place the core filters through the holes in the upper chamber.
-
2
Secure the Filters Use the filter washer and wing nut to hold each core filter in place.
-
3
Check Stability Make sure each core filter is firmly installed before adding water.
Stack the Chambers and Stand
Set the system together in the correct order before flushing.
-
1
Attach the Anti-slip Mat Place the anti-slip mat on the bottom of the lower chamber.
-
2
Place the Lower Chamber on the Stand Set the lower chamber securely on the stand.
-
3
Add the Upper Chamber and Lid Place the upper chamber into the lower chamber, then cover it with the lid.
Flush Before First Use
Flush the system before drinking water from it for the first time.
-
1
Fill the Upper Chamber Add water and let it move through the core filters.
-
2
Discard the First Batch Pour out the first filtered water from the lower chamber.
-
3
Repeat 2–3 Times After flushing, the system is ready for regular use.
How the Filter System Works
Water is added to the upper chamber and moves through the center filter by gravity. After filtration, water collects in the lower chamber and is ready to dispense from the spigot.
Add water to the top chamber. The system works without electricity, plumbing, or pressure.
Water naturally flows downward through the center filter element, where the filtration process takes place.
After passing through the filter, water collects in the lower chamber for storage and daily use.
Open the spigot to pour filtered water for drinking, cooking, or everyday hydration.
Filter Replacement Guide
Replacing filters on time helps your filtration system keep working properly. It also helps maintain water flow, drinking water taste, and everyday use confidence.
Filter life may vary by water quality, usage frequency, and total water volume filtered.
Replace the filters when they reach the rated lifespan listed for your filter model.
If filtering takes much longer than usual, clean or replace the filters as needed.
If unwanted taste or smell becomes noticeable again, it may be time to replace the filters.
Rain, river, stream, or well water may shorten filter life compared with regular tap water.
Choose filters that match your filtration system, filter series, and setup.
Prime, rinse, or flush new filters according to the product instructions.
Make sure washers, seals, and threaded parts are installed correctly.
Empty and clean the upper and lower chambers before installing new filters.
If your system uses paired filters, replace matching filters together when needed.
Write down the replacement date and set a reminder based on your usage.
Use this checklist to choose the right replacement filter for your Purewell system and check whether it may also fit select compatible systems from other brands.
| Filter Category | Filter Type | Fits Purewell Systems | Other Compatible Systems |
|---|---|---|---|
| K Series Carbon Filters (Pro) | Core Filter | SS Series and K Series filtration systems. | Select ProOne Big+ / Big II and Berkey BB9-2 style systems. |
| K Series Carbon Filters | Core Filter | SS Series and K Series filtration systems. | Select ProOne Big+ / Big II and Berkey BB9-2 style systems. |
| K Series Carbon Filters (Classic) | Core Filter | SS Series and K Series filtration systems. | Black Berkey Elements style systems and select Berkey gravity systems. |
| K Series Ceramic Filters | Core Filter | SS Series and K Series filtration systems. | Most gravity-fed systems from major brands, including Berkey, ProOne, Alexapure, Waterdrop, Doulton, Boroux, Culligan, and more. |
| SS Series Square Carbon Filters | Core Filter | SS Series and K Series filtration systems. | Select ProOne Big+ / Big II and Berkey BB9-2 style systems. |
| SF Series Multi-Functional Filter | Core Filter | SF Series filtration systems. | Select Zero pitchers and dispensers. |
| BO Series Unique Compound Filter | Core Filter | BO Series filtration systems only. | Not intended for K Series, SS Series, or other gravity filtration systems. |
| K Series Specialty Add-On Filters | Supplemental Filter | Use together with K Series or SS Series core filters. | Select Travel, Big, Royal, Imperial, Light, and Crown Berkey models as an additional filter option. |
System Package
Main parts included for the countertop gravity water filter system.
- Upper Chamber× 1
- Lower Chamber× 1
- Lid× 1
- Anti-slip Mat× 1
- Stand× 1
- User Manual× 1
Basic Spigot Parts
Parts used to install the basic stainless steel spigot.
- Basic Spigot× 1
- Spigot Gasket× 2
- Beveled Washer× 2
- Spigot Hex Nut× 1
- Wrench× 1
- Screwdriver× 1
- Plastic Spigot× 1
- Silicone Plug× 1
Selected Filter Package
Your package includes the BO Series Carbon Filters selected with this system. The filter option may vary based on your product selection.
- Selected Filters SF Series Core Filter
- Package Quantity 1 Box / 1 Filter
- System Use Install One Filter Only
2.25 Gallon Water Filter System Installation Video
Watch this step-by-step guide to set up your Purewell 2.25 gallon water filter system and install the filter element in the correct position before first use.
2.25 Gallon System Setup & Filter Placement
This video shows how to assemble the Purewell 2.25 gallon water filter system, including how to place and install the filter element properly for daily filtration.
NSF Certified for Your Health
Independently tested to meet NSF/ANSI 42 & 372 standards, the highest level of trust in water filtration.
Lead-Free Guarantee (NSF/ANSI 372)
Certified lead-free materials to keep your water worry-free.