Skip to content
De
  • English
  • Deutsch
  • Español
  • Français
  • Nederlands
EUR €

What are you looking for?

Ersatz-Edelstahlhahn für Schwerkraft-Wasserfilter

Normaler Preis €26,95 EUR


/
Steuern einbeziehen   Versandkosten werden an der Kasse berechnet.
Auf Lager - Versandfertig
Farbe: Silver
PayPal Visa Mastercard American Express Discover Apple Pay Google Pay
Geben Sie noch €100,00 aus und erhalten Sie kostenlosen Versand
Voraussichtliche Lieferung zwischen und .

Ein langlebiger Ersatzhahn aus Edelstahl 304 für kompatible Schwerkraft-Wasserfiltersysteme. Einfach zu installieren, leichtgängig bei der Ausgabe und für den zuverlässigen täglichen Gebrauch konzipiert.

Ask about Ersatz-Edelstahlhahn für Schwerkraft-Wasserfilter

Produktdetails
Produkttyp Ersatz-Zapfhahn
Marke Purewell
Material 304 Edelstahl
Oberfläche Poliert, Edelstahl
Kompatibel mit Schwerkraft-Wasserfiltersystemen
Verwendung für Wasserausgabe
Montageart Gewindebefestigung
Anschlussgröße 5/8 Zoll / 16 mm Öffnung
Stückzahl 1 Stück
Farbe Silber
Lieferumfang Zapfhahn & Dichtungsmaterial
Pflege Mit weichem Tuch abwischen
Hinweise zur Verwendung
01

Überprüfen Sie vor dem Kauf die Öffnungsgröße Ihres Schwerkraft-Wasserfiltersystems.

02

Installieren Sie die Dichtungsringe korrekt, um Tropfen oder Leckagen zu vermeiden.

03

Handfest anziehen, aber nicht überdrehen, um Beschädigungen der Dichtung oder der Behälterwand zu vermeiden.

04

Nach der Installation mit Wasser füllen und vor dem regulären Gebrauch auf Dichtheit prüfen.

05

Vor dem ersten Gebrauch reinigen und regelmäßig mit einem weichen Tuch abwischen.

06

Vermeiden Sie aggressive Reiniger, Stahlwolle oder Scheuerschwämme auf der Edelstahloberfläche.

Hinweis: Entwickelt für kompatible Schwerkraft-Wasserfiltersysteme und Getränkespender. Nicht geeignet für Küchenarmaturen, Badezimmerarmaturen oder den Einbau in Druckleitungen.
Einrichtung & Nutzung
Installation & Use Guide

Easy to Install and Smooth to Dispense

Designed for compatible gravity water filter systems, this 304 stainless steel replacement spigot uses a threaded mounting structure and included sealing hardware for straightforward installation. No power tools or plumbing connection are required.

304 Stainless Steel Threaded Mount 5/8 in / 16 mm Opening Hand Installation
Purewell replacement stainless steel spigot for gravity water filters

Installation Guide

Check compatibility and install before filling the chamber
1
Check the Opening Size Confirm that the filter chamber has a compatible opening of approximately 5/8 inch or 16 mm before beginning installation.
2
Clean the Components Rinse the spigot, sealing washers, lock nut and surrounding chamber surface with clean water before assembly.
3
Insert and Seal Place the sealing hardware on the threaded stem, insert the spigot through the chamber opening and position the inner washer evenly.
4
Hand-Tighten and Test Secure the lock nut by hand until snug. Add a small amount of water and inspect the connection before filling the chamber completely.
Installation tip: Keep the spigot level while tightening and make sure the sealing washers sit flat against the chamber wall. Tighten only enough to create a secure seal—excessive force may deform the washers or damage the chamber.

Use & Care Guide

Simple daily habits help support smooth dispensing
1
Open Smoothly Operate the handle with a controlled movement and place the glass or container directly beneath the outlet before dispensing water.
2
Close After Dispensing Return the handle fully to the closed position after each use and check that water is no longer dripping from the outlet.
3
Clean the Surface Wipe the stainless steel with clean water, mild dish soap and a soft cloth or sponge. Rinse thoroughly to remove cleaning residue.
4
Inspect the Seal Periodically check the washers, lock nut and chamber connection. Reposition or gently tighten the hardware if moisture appears.
Important: Do not use steel wool, abrasive pads, harsh chemical cleaners or concentrated bleach on the stainless steel surface. This spigot is designed for compatible gravity water filter systems and beverage-style dispensers—not kitchen sinks, bathroom faucets or pressurized plumbing.

NSF-zertifiziert für Ihre Gesundheit

Unabhängig geprüft gemäß den NSF/ANSI-Standards 42 & 372, dem höchsten Vertrauensstandard bei der Wasserfiltration.

Garantie für Bleifreiheit (NSF/ANSI 372)
Zertifizierte bleifreie Materialien für bedenkenloses Wasser.

Das könnte Ihnen auch gefallen

  • 5 stars: 1 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
D
D.M. (United States)
Purewell spigot

Very good kit.
Fit well and snug. I really like the two gaskets and concave washers. Sealed it up proper.
Worth it!!!!

Einen Hinweis zu Ihrer Bestellung hinzufügen
Coupon Code